Frequently Asked Questions
Complete list of questions and answers about the extinct profession: Typewriter Repairman
From Late Twentieth Century • 28 questions
Did Typewriter Repairmen have any special uniforms or attire?
A jacket with pockets, or a shop apron at the bench, and clothes that could take oil and solvent were the dress. He did not wear a typist's cuffs as his working self. On a call he tried to look respectable enough for a front office and practical enough to lie partly under a desk. The open case was the real uniform.
What ultimately led to the extinction of the Typewriter Repairman profession?
Word processors and personal computers in the 1980s ended the profession. The office no longer kept a fleet of typewriters that needed drawbands, platens, and alignments. A remnant of shop work on old machines is not the traveling route. The repairman ended when the instrument he was hired to save stopped being the instrument of the office.
Were there any specific rituals or traditions associated with being a Typewriter Repairman?
Each call started with a sample line typed on the customer's paper, so the fault was visible before tools came out. Then cleaning, then the particular repair, then another line to show the machine. Shop work began with a tag on the typewriter and ended with the same test. The ritual was prove, fix, prove again.
What was the public perception of Typewriter Repairmen?
Offices treated him as the man who could save a morning, welcome and slightly interrupting. Typists knew which repairman rushed and which one left the touch better than he found it. He was not a professional in the ledger's sense and not a menial in the office's, because without him the correspondence stopped. The street barely knew the trade until the typewriters were already gone.
Were there any female Typewriter Repairmen?
The machines were used overwhelmingly by women typists, and the traveling repair trade was staffed by men. Women worked in typewriter factories and sometimes at parts counters without being the person sent on the call. This exhibit is that call and the shop bench behind it. It does not reassign the screwdriver in order to blur who was hired to carry it.
How did the job of a Typewriter Repairman evolve over time?
Early repair followed the first office standards, a forest of typebars and a carriage. Portables added a lighter call. The Selectric in the 1960s changed the mechanism more than any previous model, and the same man often had to learn both. Word processors did not refine the typebar. They removed the object. The evolution is a long service trade with a short, sharp end.
Were there any specific laws or regulations pertaining to the job of a Typewriter Repairman?
A shop might need an ordinary business license, and nothing like a state engineering board examined a typewriter mechanic. Warranties were the maker's or the dealer's contract, not a statute. Solvents and later disposal rules touched the bench only lightly. The law that mattered was the invoice and the customer's right to a machine that had been paid for. No charter created the route.
Did Typewriter Repairmen have any benefits or perks?
Independence on a route, a case that was his own business if he was not a dealer employee, and steady work as long as every office had machines were the advantages. Dealers sometimes supplied the van and the parts account. There was no tip as a system, though a grateful office might be a loyal one. Knowing a building's machines by their squeaks was the quiet perk.
Were there any differences in the job of a Typewriter Repairman in different countries?
He worked at office desks, in typing pools, in small professional rooms, and at a bench in a typewriter shop or a dealer's back room. Downtown routes and suburban offices were the geography of the late trade. The home portable on a kitchen table was a lesser call. The place was wherever the machine sat, which is why the trade looked like visiting rather than like a single factory.
Did Typewriter Repairmen have any specific training or education?
He learned from a dealer, a factory school, or an older mechanic, machine by machine, because a Royal and an Underwood did not come apart the same way. Manuals and parts lists were the texts. The Selectric required a separate schooling. No university taught it. The first solo call, with a typist watching, was the test that a shop apprenticeship only approximated.
Were there any notable challenges or obstacles faced by Typewriter Repairmen?
The hard part was diagnosis in someone else's office, with the mail waiting and the fault intermittent. Tiny adjustments decided whether type aligned. A route in bad weather, a heavy machine to carry, and solvent on the hands were the physical side. The hardest calls were the ones that had been repaired badly already. Patience was the skill the invoice could not quite bill.
How did the personal computer affect the job of a Typewriter Repairman?
Word processors in the late 1970s and personal computers through the 1980s replaced the typewriter on the desk, and with it the route that had cleaned segments and set type. Some dealers tried to service the new machines and found the parts, the training, and the customers were a new trade. Others closed. The remnant who still repairs a collector's portable is not the occupation that once covered every clerical floor.
What role did Typewriter Repairmen play in society?
His role was to keep a mechanical writing instrument in working order without the office owning a mechanic of its own. He did not type the letters and did not sell the correspondence. The role sat between the manufacturer and the typist. When the instrument left the desk, the role had nothing to kneel beside.
Were there any famous Typewriter Repairmen in history?
The famous names are the machines, not the mechanics: Underwood, Remington, Royal, and the IBM Selectric of 1961, whose golf ball changed what a repairman had to know. No repairman became a public figure for aligning type. The trade's reputation was local, a shop's name painted on a case. This exhibit uses the machines as the fame and the man with the case as the subject.
What time period did Typewriter Repairmen exist in?
Typewriter Repairmen worked mainly across c. 1920–1989. Service calls run from the decades when typewriters became ordinary office furniture, early in the twentieth century, through the Selectric years, and into the 1980s when the calls stopped being ordinary. The label uses the late century because that is when the trade ended, not because the first repairman was modern. A 1935 shop and a 1975 route are the same occupation at two points on one route.
Were there any specific qualifications or skills required to be a Typewriter Repairman?
A dealer or a shop qualified him by letting him train on its machines and then by sending him out alone. Factory courses and parts catalogs helped. No state license said he might repair typewriters. The customer's next call was the ongoing qualification. A man who left machines worse was not called again, which was a stricter board than most paperwork.
What was the average age of a Typewriter Repairman?
Repairmen were adult men, often starting young as shop helpers and keeping the route into middle age if the business held. The work needed eyes and patience more than youthful bulk, though carrying a standard desktop was real labor. It was not a boy's errand. Age was an advantage on diagnosis and a problem only when the hands stopped wanting the small screws.
Was there a hierarchy within the profession of Typewriter Repairman?
On a call he outranked the machine and not the office manager. Inside a dealer he might be junior mechanic, senior, or the owner of the route. Typists depended on him and did not report to him. Rank was skill with a particular make, recognized by who was trusted with a Selectric or a badly damaged carriage. The public had no rank for him at all.
How were Typewriter Repairmen paid?
Payment was a call charge plus parts, or a wage from the dealer who owned the calls. The invoice separated labor from a drawband or a platen so the office could see both. Nothing was a tip built into the price. A contract to maintain a whole typing pool paid more smoothly than random emergencies. Slow weeks were simply fewer calls, and the scale did not invent work.
Did Typewriter Repairmen have any interactions with the public?
The public met him only if a home portable failed or if he crossed a lobby with a case. His real audience was the office: the typist, the supervisor, the person who signed the invoice. A machine returned to the desk was the whole relationship. He had no counter of his own except at the shop, and many customers never saw that shop.
What was the work schedule like for a Typewriter Repairman?
Hours followed the offices, daytime calls with a bench evening if machines had been hauled in. A broken machine on a deadline could stretch a visit. The route was not a night shift in a plant, and it was not a leisure trade. Saturdays depended on whether the shop was open and whether a customer would let him in. The week was as full as the telephone.
What tools did Typewriter Repairmen use to do their job?
The tools were a case of screwdrivers, spring hooks, alignment pliers, brushes, oil, and the small parts a route consumed: drawbands, feet, screws, and later Selectric elements. The typewriter was the customer's. He did not carry a whole machine unless he was collecting one for the shop. What answered the fault was that kit plus the knowledge of which screw was the one that lied.
Were there any dangers associated with being a Typewriter Repairman?
Solvent, springs under tension, and the weight of a desktop machine were the ordinary risks, plus traffic on a route. A typebar could pinch. None of this was a dramatic trade, and the record does not pretend otherwise. The lasting harm was more often the end of the route than an injury on it. Hands took oil and small cuts and kept the next appointment.
Did Typewriter Repairmen work alone or in a team?
A dealer mechanic worked with a counter clerk, a parts room, and sometimes an apprentice. An independent worked alone and called a shop when he needed a part he did not carry. The typist was the partner on the call, the person who knew the fault and had to get the desk back. Manufacturers were distant. The team, if it existed, was small and local.
What were the typical duties of a Typewriter Repairman?
Duties were to diagnose the fault, clean what cleaning would cure, replace or adjust what would not, and leave the machine writing a straight line. He ordered parts, kept the case stocked, and billed honestly enough to be called again. He did not teach typing and did not draft the letters. The duty was a working instrument, tested before he left the desk.
How did one become a Typewriter Repairman?
He started as a helper in a shop or as a junior at a dealer, handing tools and learning one make until he could be sent on simple cleanings. Factory school might interrupt that. There was no formal indenture in the late trade. The start that mattered was the first call he finished without a senior in the room, and the customer who did not complain.
Were Typewriter Repairmen considered skilled workers?
Alignment, timing, and the feel of a particular escapement were a real mechanical skill, narrower than a machinist's and deeper than a hobbyist's. Good repairmen were known by touch. The Selectric added an electronic-mechanical skill some typebar men never wanted. It was still a service craft, paid by the call. When the machines left, the skill had a tiny collector's market and no office route.
What was the purpose of a Typewriter Repairman?
His purpose was to make a costly office machine last for years instead of being scrapped at the first skipped letter. Firms owned dozens of typewriters and could not return each one to a factory. The repairman existed because the mechanism was repairable and the correspondence could not wait. When the desk held a computer, that purpose no longer applied to a typebar or a golf ball.