Bu içerik çevrilmedi.
Sık sorulan sorular
Complete list of questions and answers about the extinct profession: El Dokuma Dokumacısı
From Sanayi Devrimi • 28 questions
Did handloom-weavers have any special uniforms or attire?
At the loom people wore ordinary cottage clothes, sleeves pinned back, and often a coarse apron against the grease on woollen yarn. Cotton weavers in a shut Lancashire room added a shawl, because the yarn wanted moisture and the fire was kept low enough not to dry it. There was no trade costume. A weaving house was known by the thud of the lathe through the wall, not by a badge on the weaver.
What ultimately led to the extinction of the Handloom Weaver profession?
The power loom ended it, in cotton across the 1810s to the 1840s and in ordinary wool soon after. Mills sold cloth below any piece rate that would feed a cottage, and Parliament, having taken the evidence of the collapse, fixed no minimum. A scatter of handlooms remained on special goods. The trade as a living for streets of families did not remain with them.
Were there any specific rituals or traditions associated with being a Handloom Weaver?
A new piece had a small fixed order: warp tied on, lease rods settled, a few trial picks thrown and drawn out again if the selvedge was foul. Many cotton weavers wetted the warp or kept the stone floor damp so the ends would not snap in the first hour. The piece stayed on the loom until it measured what the warehouse had written down. Cutting short, hoping to be paid kindly, was how a weaver lost the next warp.
What was the public perception of handloom-weavers?
In the 1790s a cotton weaver with a full loom was treated as a prospering cottage worker, a person a parish was glad to have. By the 1830s the same loom signalled poverty, and visitors who wrote up the trade described families still skilful and no longer able to live by it. Neighbours did not think the weavers had forgotten the craft. They thought the price had gone, and the parliamentary papers say the same.
Were there any female handloom-weavers?
Women wove in large numbers, especially after mill spinning took the wheel out of the house and left a loom standing idle. Children wound bobbins for pence inside the family piece and, once tall enough, took a narrow web of their own for a still smaller rate. The inquiries of the 1830s show households where whoever could throw a shuttle did so. The fall in pay was not a man's story with women merely helping at the side.
How did the job of a Handloom Weaver evolve over time?
Handloom weaving is older than any factory, in wool, linen, and then cotton. The flying shuttle and a flood of mill-spun yarn let one weaver produce more in the late eighteenth century, which is when the piece rate was briefly high. From the 1810s the power loom took the plain work back into the mill. By the 1840s a cotton handloom survived on coarse remnants or on fancy webs the early machines handled badly.
Were there any specific laws or regulations pertaining to the job of a Handloom Weaver?
Weavers petitioned, year after year, for a minimum piece rate fixed by statute, and Parliament did not grant one. The Select Committee on Hand-Loom Weavers, appointed in 1834, took evidence through the rest of the decade and left the manufacturers' prices unbound. Earlier Combination Acts had made an open union difficult. The law that decided the trade was the refusal of a floor under the piece, not an act abolishing the loom.
Did handloom-weavers have any benefits or perks?
Owning the loom meant no overlooker and, in theory, a choice of hours. In the bad decades that choice was only the choice to sit longer for a worse price. Commissioners mention a garden or a pig more often than any perquisite of weaving itself. Yarn was not a benefit. It was charged to the house until the piece came back the length and quality the warehouse had ordered.
Were there any differences in the job of a Handloom Weaver in different countries?
Cotton handlooms filled the Lancashire weaving parishes: Bolton, Blackburn, Burnley, and the Pennine villages that carried pieces down to their warehouses. Woollen handlooms held on around Frome and Trowbridge in the West Country, and in parts of the West Riding and of lowland Scotland. The price was set at the warehouse, so a weaver's real map was the distance a finished piece could be carried on foot.
Did handloom-weavers have any specific training or education?
Children learned in the house, winding bobbins first and then weaving a narrow piece under a parent who could still reach across to correct a fault. The ordinary cotton weaver of the 1820s had no town indenture, though older borough woollen trades had once insisted on them. A girl or boy was useful at the loom well before adult strength. Training was finished when the warehouse accepted a piece without a heavy abatement.
Were there any notable challenges or obstacles faced by handloom-weavers?
Once the hands knew the shuttle, the hard part was the arithmetic. A weaver sat from early morning into the evening to finish a length that, in the 1830s, might pay only a few shillings. Damp rooms, close looking, and the repeated beat of the batten were the conditions the commissioners noted in passing. What they measured as the hardship was the rate. A clean piece and a spoiled piece were no longer far apart in money.
How did the power loom affect the job of a Handloom Weaver?
Practical power looms, developed after Cartwright's patents of the 1780s, spread through Lancashire cotton from the 1810s into the 1840s and then through the woollen mills. A few minders and a line of machines produced the plain cloth that had kept whole parishes of cottages. Merchants cut the hand rate to meet the mill price. Fancy and awkward goods lingered for a while. The ordinary web, which had employed the most hands, did not.
What role did handloom-weavers play in society?
The weaver turned yarn put out by a mill or a stapler into cloth, working in a cottage the merchant did not own. In the boom years that cottage was the bottleneck of the cotton trade and was paid like one. After the power loom, the same person was a rival the mill no longer needed. The role was always piecework between the spinner and the cloth market.
Were there any famous handloom-weavers in history?
The public record is the Select Committee on Hand-Loom Weavers and its assistant commissioners' reports from the 1830s into the early 1840s. John Fielden, the Todmorden manufacturer and member for Oldham, kept the falling rates in Parliament when a minimum bill was what the weavers asked for. The fact those papers made famous is the wage collapse itself, from near a pound a week toward a few shillings, not a legend of machine-breaking.
What time period did handloom-weavers exist in?
handloom-weavers worked mainly across c. 1770–1850. Cottage looms are ancient. The crisis of this trade sits in the Industrial Revolution: high cotton piece rates in the 1790s and the war years, then the long fall as power looms spread between the 1810s and the 1840s. By mid-century the cotton handloom weaver was no longer the typical worker of that cloth. A few wool handlooms outlived cotton on fabrics the early mill loom wove badly, and they too thinned as the machines improved.
Were there any specific qualifications or skills required to be a Handloom Weaver?
The warehouse qualified a weaver by the piece on the counter: even selvedges, the count ordered, the right length, and few faults to abate. No guild ticket was required in the Lancashire cotton villages of the 1820s. A parent who could weave could teach a child. Fine reeds and patterned drafts were a real qualification, which is why a fancy hand lasted longer than a plain one when the common rate collapsed.
What was the average age of a Handloom Weaver?
Children wound bobbins very young and often wove a narrow loom in their early teens, the pence going into the family piece rather than into a wage of their own. The main weaver was a grown woman or man, sitting the full day. Reports describe whole households, not a shop of journeymen of one age. Older weavers stayed because another trade would not take a lifetime of hands at a few shillings a week.
Was there a hierarchy within the profession of Handloom Weaver?
Around 1800 a cotton weaver ranked as a skilled cottage worker, below the putter-out and well above a day labourer, and was conscious of it. By the 1830s that standing had fallen with the rate, and official visitors classed these families among the poorest manufacturing people in the country. Older borough wool weavers had once stood inside guild memory. The power loom did not give them a new rank inside the mill. It took the work away.
How were handloom-weavers paid?
Pay was a price per yard or per piece, agreed with the putter-out and reduced for faults found at the counter. The shape is the history: close to a pound a week for a good cotton weaver in the late 1790s, and a few shillings for a longer week in the inquiries of the 1830s. Yarn was often supplied on account. There was no weekly salary, and a piece the warehouse refused was a week with no pay at all.
Did handloom-weavers have any interactions with the public?
By the 1830s the reading public knew the handloom weaver from parliamentary papers, pamphlets, and petitions, as a case of distress. Those papers describe a fallen piece rate. They are not a nursery tale about people who could not bear the sight of a machine. Manufacturers replied that the power loom was cheaper and that statute should not freeze a cottage price. In print, the weaver became the example of a trade a mill had priced out.
What was the work schedule like for a Handloom Weaver?
Hours grew as the rate shrank. A weaver who had lived on a normal day in the boom sat from early morning until late evening in the 1830s, commonly twelve hours and often more, to finish cloth worth a few shillings. Children winding bobbins shared the same room and much of that day, for pence inside the household total. There was no factory bell. The day ended when the piece was long enough to carry in, or when the light failed.
What tools did handloom-weavers use to do their job?
The tool was the handloom in the cottage: frame, heddles, reed, batten, and shuttle, often a flying shuttle on a race, set where the light was least poor. A bobbin winder, a temple to hold the cloth out to width, and lease rods completed the ordinary kit. Many weavers owned the loom or paid rent for it. That heavy wooden frame was their capital, and in the end it was also what they could not afford to leave.
Were there any dangers associated with being a Handloom Weaver?
Commissioners did not describe the handloom as a famous destroyer of bodies. They described long days, cottages kept damp for the yarn, and close looking at fine ends. The harm they put first was want: more hours spent to earn a few shillings, with children winding in the same room for a share of that poor piece. A snapped warp wasted time, which in those years was the loss the house could least afford.
Did handloom-weavers work alone or in a team?
The team was the household. One adult wove, a second loom might be worked by a wife or a grown child, and smaller children wound bobbins. The putter-out stood outside the room, sending yarn and receiving cloth. There was no overlooker on a gallery. When the price fell, the only extra labour to be had was another person in the family old enough to throw a shuttle.
What were the typical duties of a Handloom Weaver?
The weaver had to get the warp on, keep an even tension, throw a clean shuttle, beat the cloth up, mend broken ends, and deliver the length ordered. Faults were taken off the pay at the warehouse counter. Keeping the yarn fit to weave, in a room damp enough for cotton, was part of the work. Carrying the piece in and bringing the next warp home closed the round.
How did one become a Handloom Weaver?
A child started by winding bobbins at a parent's elbow and moved to a narrow loom when tall enough to sit the seat. In the boom a young weaver could take an old loom and a putter-out's yarn and be a separate earner within a year. No company fee was asked. In the bad decades the beginning was the same and the prospect was not: a beginner's pieces would not keep a new household.
Were handloom-weavers considered skilled workers?
Plain calico asked for an even beat and a straight selvedge more than for mystery, and a power loom could be taught that. Fine reeds, checks, and small figured drafts asked for a real memory of the loom, and those weavers were the last to be undercut. The skill did not vanish when the wage did. It only decided who fell later. The plain majority, who had earned the high rates of the 1790s, fell first.
What was the purpose of a Handloom Weaver?
The purpose was cloth for the warehouse: cottons for the home market and for export, woollens for clothing and for the western trade. The handloom let the merchant keep his capital in yarn and goods while the weaver found the loom, the room, and the hours. That split built the early cotton industry. It stopped making sense when the merchant could weave the same cloth on looms he owned in a mill.