The Jobs Museum

Bu içerik çevrilmedi.

Sık sorulan sorular

Complete list of questions and answers about the extinct profession: Çukur Testercisi

From Georgian Dönemi • 28 questions

Did pit-sawyers have any special uniforms or attire?

The top-sawyer wore a leather apron or a patched coat over a wool waistcoat, sleeves clear of the tiller, and boots that would hold on a round log. The pitman dressed for the dust, often with a cloth over his head and neck and a rag to wipe his face between cuts. No livery marked the trade. The yard knew the pair by the saw and by which man was trusted to stand above.

What ultimately led to the extinction of the Pit-Sawyer profession?

Steam sawmills ended it. Once a mill in the timber port could cut deals faster and sell them below the pit's price per hundred feet, merchants and shipyards stopped keeping a pair. Water mills had already taken some straight inland work. A few pits lingered for awkward compass timber and for settlements with no mill, but by the middle of the nineteenth century the ordinary pit-sawyer had no balks left that anyone would pay two men to cut.

Were there any specific rituals or traditions associated with being a Pit-Sawyer?

Before the first pull the top-sawyer snapped a fresh chalk line and both men sighted it from the end of the balk, because a crooked line spoiled a deal they could not sell. Dockyard pairs often nicked the butt in the shipwright's order so the grain would run as the frame required. Talk of the split waited until the board was stacked. Starting a cut with the shares still argued was blamed, in yard talk, for a wandering kerf.

What was the public perception of pit-sawyers?

Buyers of deals met the work as a stack in a timber yard and rarely as two men in a hole. Inside the yard the top-sawyer was the man who could hold a line, and his title became a compliment for anyone first at a job. The pitman was less regarded and less paid, though every senior hand knew the cut failed if the stroke from below went slack.

Were there any female pit-sawyers?

The saw over the pit was a man's place, and the paid pair was two men splitting one tally. Women around a timber yard more often barked logs, carried light deals, or kept the cook-house that fed a dockyard gang. A sawyer's wife might take the week's money from the merchant and keep the house on it, but the tiller was not passed to her. The senior hand on the log was male.

How did the job of a Pit-Sawyer evolve over time?

Early pits were rough holes beside a fall of timber, used and then filled. By the eighteenth century a busy yard kept a lined pit or a raised cradle, a long saw with a tiller above and a box handle below, and a standing pair who did little else. Colonial towns repeated that gear when no mill had been shipped. The last change was not a better pit. It was the mill that made the pit idle.

Were there any specific laws or regulations pertaining to the job of a Pit-Sawyer?

No statute banned the saw pit or licensed the man who stood in it. Dockyards kept store rules for the thickness of deals and the marking of the king's timber, and those rules bound the tally rather than the sawyer's right to work. When London sawyers attacked a mechanical mill at Limehouse in 1768, they were not enforcing a privilege the law had written down. They were trying to stop a machine the law would not stop for them.

Did pit-sawyers have any benefits or perks?

Offcuts, bark, and short ends that a merchant would not measure often stayed in the yard, and a trusted pair could take home firing wood. The real advantage was the top-sawyer's larger share of the piece, plus steadier balks at a dockyard than a country pair could expect from farmers. There was no guild feast, no livery, and no pension attached to the pit. Slack timber meant a slack week.

Were there any differences in the job of a Pit-Sawyer in different countries?

Royal dockyards at Deptford, Woolwich, Portsmouth, and Plymouth kept pits and raised frames beside the slips. London merchants sawed in riverside yards, Limehouse among them. Country pits served house-builders wherever oak was felled and a mill was a day's haul away. The same pair appears in colonial timber towns from New England to the early Australian settlements, wherever boards were wanted before a mill was built.

Did pit-sawyers have any specific training or education?

A young man learned as pitman under an older top-sawyer, first clearing dust, driving wedges, and taking the lower handle on easy deal. He was taught to feel a bind in the kerf before anyone trusted him to line a cut. Most yards had no written indenture, though a dockyard gang kept its own time. The step that mattered was being allowed up onto the log.

Were there any notable challenges or obstacles faced by pit-sawyers?

The pitman pulled a long blade for hours, arms high at the start of each stroke, in a hole where the dust had nowhere else to go. The top-sawyer stood a narrow log in wet weather and still had to keep the chalk true while his legs stiffened. Oak and elm moved slowly. A pinched kerf stopped the whole day, and the timber never arrived already squared to the saw.

How did the steam sawmill affect the job of a Pit-Sawyer?

Steam sawmills set up in the timber ports and dockyard towns from the early nineteenth century cut a balk into deals in a fraction of the day a pair needed. They sawed straight stock more evenly and sold it to builders who no longer waited on a pit. Water mills had already taken some inland work. Once the mill price undercut the hundred-foot rate, merchants stopped hiring the pair except for odd compass timber.

What role did pit-sawyers play in society?

Pit-sawyers turned round timber into the deals, planks, and scantling that carpenters and shipwrights could actually use. A wooden ship needed curved frame pieces as well as straight deals, and a man on the log could follow a line an early mill handled poorly. In a colonial town the pit was often the first step from a felled trunk to a floorboard. The other trades began where the sawyer's tally stopped.

Were there any famous pit-sawyers in history?

The trade's lasting public trace is the word top-sawyer, which came to mean the best hand at a thing, the one who stood on the log. The other episode people recorded is the 1768 attack on a sawmill at Limehouse, when London sawyers tried to wreck the machine they believed would take their cuts. No national figure came out of the pit. The men remained pieceworkers, and most of their names survive only as yard tallies.

What time period did pit-sawyers exist in?

pit-sawyers worked mainly across c. 1600–1850. The pit was ordinary in Britain by the seventeenth century and remained so through the Georgian decades into the 1840s, later only where a mill had not arrived. Sawyers worked when timber was landed, not by a farming season, though country pits were busiest after winter felling. Colonial pits lasted as long as the settlement had logs and no mill. By about 1850 the steam mill had the everyday deals.

Were there any specific qualifications or skills required to be a Pit-Sawyer?

A man was fit for the top of the log when a yard would trust his chalk line for the full length of a balk, and when he could set and file the long saw so it would not wander. There was no diploma. The pitman was judged by a straight pull and the stamina to keep it all day. A stranger proved himself on cheap deal before anyone put him onto oak marked for a ship.

What was the average age of a Pit-Sawyer?

Pitmen were often younger men, in their twenties, strong enough for the lower handle and still learning the line. Top-sawyers were usually in their thirties or forties and kept the place while their balance on the log held. Boys in a dockyard gang might clear dust in their teens. It was not a child's trade: the saw needed a grown pair, and the pay was split between two adults.

Was there a hierarchy within the profession of Pit-Sawyer?

Inside the pair the top-sawyer ranked above the pitman and took the larger share of the money. In a dockyard the sawyers stood below the shipwrights who marked the timber and above the labourers who only rolled logs. Country sawyers were rough craftsmen, respected by carpenters who needed true deals, but they had no livery company to place them in a civic order. The mill hand who replaced them was a different kind of worker altogether.

How were pit-sawyers paid?

Payment was by the hundred superficial feet, or by a price struck for one difficult balk, and the two men split it unequally. The top-sawyer's share was the senior wage. The pitman's was smaller, though his place was the harder one. A fair day on deal might come to a few shillings for the pair, paid when the merchant agreed the tally. Sharpening a saw on a day with no board cut brought nothing.

Did pit-sawyers have any interactions with the public?

The public met the trade as boards stacked and priced, not as a spectacle of the pit. Top-sawyer remained a compliment in common speech long after most listeners had never seen a saw pit. The Limehouse mill riot of 1768 was reported as disorder. Once steam mills sold cheap deals, the pit-sawyer left the newspapers without a farewell notice.

What was the work schedule like for a Pit-Sawyer?

A pair worked with the daylight, often from early morning until the yard went dim, because a chalk line was a poor thing to follow by lantern. One hard balk of oak could take the best part of a day. A run of easier deal might fill the same hours with more boards and a better tally. They stopped when the saw needed filing or the pit choked with dust. No statute fixed the hours. The log and the bargain did.

What tools did pit-sawyers use to do their job?

The essential tool was the two-man pit saw, a long blade with a tiller for the man above and a box handle for the man below, filed and set by the pair themselves. With it went iron dogs to spike the log, a chalk line, wooden wedges for the kerf, and rollers or a cant hook to move the balk. The pit, or a raised cradle in a dockyard, gave the blade room to travel. Without that length of saw, two men could not cut through a balk.

Were there any dangers associated with being a Pit-Sawyer?

The pitman stood under a balk that could shift if a dog drew, and he took the dust of the whole cut. The top-sawyer worked on round timber in the wet, where a slip meant leaving the line. The pair treated sound dogs, driven wedges, and a clear kerf as the whole of their caution. Yard talk remembered dust, strain, and long days, and did not dress the work up as a show of accidents.

Did pit-sawyers work alone or in a team?

The working team was the pair and one saw: top-sawyer on the log, pitman in the pit. A busy dockyard added labourers to roll balks and a boy to clear dust, but the cut itself was still two men matched stroke for stroke. A new pitman slowed even a good top-sawyer. The shipwright or the merchant marked what was wanted, then left the pair to the line and the tally.

What were the typical duties of a Pit-Sawyer?

They had to move the balk onto the pit, dog it fast, mark a true line, and saw it into the deals or planks ordered, keeping the kerf wedged and the saw sharp. They stacked the sawn stuff for measuring and left the pit clear for the next log. The top-sawyer answered for the line. The pitman answered for the pull and for calling when the blade pinched. Boards the carpenter sent back came out of their bargain.

How did one become a Pit-Sawyer?

A young man started below, in the pit, if a top-sawyer would have him and if he could stand the dust for a full day. He learned the stroke on deal rather than oak, and he learned to file the saw in the evening when the light had gone. Some came in through a dockyard gang as labourers and were tried on the handle. There was no fee to a guild. The start was being trusted with the lower end of a blade already in the wood.

Were pit-sawyers considered skilled workers?

The skill was a straight cut: reading grain, setting the teeth, and keeping a chalk line from one end of a balk to the other while both bodies were moving. A clumsy pair wasted timber, and timber was the dear part of the bargain. Judging how a curved ship-piece should be lined was the top-sawyer's particular eye. Strength without a true line only produced boards the carpenter refused.

What was the purpose of a Pit-Sawyer?

Their purpose was to turn a round or squared balk into usable stuff: deals for floors and roofs, planks for boats and carts, and shaped pieces for ship frames. Carpenters and shipwrights could not work from the whole log. In colonial towns the pit was often the only path from forest to house. The sawyer sold the cut. The merchant still owned the wood.