Questo contenuto non è stato tradotto.
Domande frequenti
Complete list of questions and answers about the extinct profession: Ruotaio
From Primi del Novecento • 28 questions
Did wheelwrights have any special uniforms or attire?
The wheelwright wore a leather apron over ordinary working clothes, sleeves clear of the lathe and the drawknife, and boots that could stand a shop floor full of shavings. On tyre day he added nothing smarter. The fire was a working fire, and a good coat was left on a peg. There was no livery. A country customer knew him by the shop and by the wheels leaned outside it, not by a badge.
What ultimately led to the extinction of the Wheelwright profession?
Rubber tyres, motor vehicles, and factory wheels ended it, mostly in the first decades of the twentieth century. A shop could survive for a while on repairing iron-shod farm wheels. It could not survive the end of new orders. Sturt's Farnham shop is the documented case of a living craft writing itself down as the work left. By the 1930s the ordinary parish no longer made its own wheels.
Were there any specific rituals or traditions associated with being a Wheelwright?
Tyre day had a fixed order the shop did not scramble: hoop measured, fire laid, wheel set level, enough hands to lift, water ready to quench. Sturt and other writers record the care before the heat, because a tyre cut too small would not go and one cut too large would never pull the joints tight. The quench was the moment neighbours stepped across the road to watch. The measuring, which decided it, had been done quietly at the bench.
What was the public perception of wheelwrights?
Farmers regarded a good wheelwright as a necessary man, slower than they liked and hard to replace, because a failed wheel stopped a harvest cart. Townspeople who had never ordered a waggon barely knew the trade until motor garages made the old shop look quaint. Inside the craft he was a wood-and-iron worker of broad skill, and he resented being treated as a mere carpenter who happened to make circles.
Were there any female wheelwrights?
The bench was a male apprenticeship. Seven years on stocks, spokes, and felloes was not opened to girls in the ordinary country shop. Women of the household kept the book, dealt with customers at the door, and in a mixed shop might paint or line a cart body. The famous record, Sturt's, is a man's shop. The money of the business often passed through a wife's hands. The spoke-shave did not.
How did the job of a Wheelwright evolve over time?
Wooden wheels with iron strakes, and then with a continuous hoop tyre, are a long country craft, busy wherever farms used carts. The nineteenth century added better iron and a wider market for light carts, without yet removing the bench. The early twentieth century brought rubber tyres, motor vehicles, and factory wheels together. By the 1930s the trade that Sturt had entered in 1884 no longer recruited a boy for life.
Were there any specific laws or regulations pertaining to the job of a Wheelwright?
No statute abolished the wheelwright or licensed the motor garage in his place. Road and motor law, from the Locomotives on Highways Acts through the Motor Car Act 1903 and later traffic rules, changed what vehicles were allowed and expected on the public road. Those laws did not mention felloes. They helped a world in which the horse waggon was no longer the ordinary goods vehicle, and the shop's order book followed the road.
Did wheelwrights have any benefits or perks?
A master wheelwright owned the shop and the customer list, and a steady round of farm repairs was the real security, better than waiting on a new waggon. Offcuts of oak and elm heated the shop and sometimes the house. A journeyman's perk was the better part of a pound a week and a trade that, until the motors came, every parish seemed to need. There was no company pension behind it.
Were there any differences in the job of a Wheelwright in different countries?
The shop was a country-town craft rather than a single district: Farnham in Surrey is the one Sturt made famous, and there was a wheelwright's yard in hundreds of other market towns. Agricultural counties kept the busiest repair work. Carriage builders in larger towns had their own wheel shops, a more specialised cousin. The motor trade that replaced both did not stand on the same yard.
Did wheelwrights have any specific training or education?
A boy was bound apprentice, traditionally for seven years, starting on rough dressing and odd jobs before he was trusted with a stock or a tyre. He learned timber by handling it: which elm for naves, which oak for spokes, how a felloe must be cut to the grain. Sturt came to the Farnham shop as a master who had to learn from the men. The ordinary road in was the indenture, and it died when masters stopped offering it.
Were there any notable challenges or obstacles faced by wheelwrights?
Seasoned timber was heavy, the joints had to be exact, and a mistake showed only when the wheel was finished or, worse, when it failed on the road. Tyre day was the sharp hour: heat, weight, and a hoop that had to be seated before it shrank in the wrong place. The everyday hardness was the length of time a proper wheel took, which a factory price did not allow. Farmers wanted it both perfect and soon.
How did factory-made wheels affect the job of a Wheelwright?
Factories produced wooden wheels in quantity and then metal wheels, undercutting the bench on price and on time. Rubber tyres changed the rim the wheel needed, and the motor trade stopped ordering horse vehicles at all. A country shop could still reset a tyre on an old cart. It could not win a contract for the wheels of a new motor lorry, and that was where the money went.
What role did wheelwrights play in society?
The wheelwright kept farm and road transport rolling in wood and iron. Without him a broken felloe or a loose tyre laid up a waggon until someone who understood the dish could repair it. He also built new wheels into the vehicles the blacksmith and the body-maker completed. The motor garage and the factory inherited the role of keeping vehicles moving. They did not inherit the timber.
Were there any famous wheelwrights in history?
George Sturt, writing as George Bourne, made the craft famous in The Wheelwright's Shop (1923), an account of the family business at Farnham which he took on in 1884. The book is the best English record of stocks, spokes, felloes, and the tyre fire as a living shop, not as a museum demonstration. Most wheelwrights never had a book. They had a yard, a set of customers, and, in the end, an order book that motor vans emptied.
What time period did wheelwrights exist in?
wheelwrights worked mainly across c. 1750–1930. The wooden wheel is ancient. The form this exhibit means, hoop tyre and country shop, is the eighteenth- and nineteenth-century trade at full stretch. Sturt's years at Farnham, from 1884, catch the late living craft. The end is early twentieth century: rubber tyres and motors before 1914, and a thinning of apprentices through the 1920s, so that by about 1930 the ordinary parish no longer bound a boy to the bench.
Were there any specific qualifications or skills required to be a Wheelwright?
A man was a wheelwright when he could build a wheel that ran true: stock boxed, spokes driven, felloes jointed, dish correct, tyre shrunk without wrecking the timber. The apprenticeship was the formal qualification, seven years in the old practice. A journeyman proved himself on the work a master would put his name to. There was no distant examination. A wheel that failed on the road was the disqualification that mattered.
What was the average age of a Wheelwright?
Boys were bound in their teens and served the seven years into early manhood. The fully skilled wheelwright was an adult, often at his best from the mid-twenties through middle age, while his eye for timber and his judgement of a tyre still agreed. This was not a children's industry. A lad swept and roughed out. He did not shoe a tyre on his first Monday, and he was not paid a man's week until he could.
Was there a hierarchy within the profession of Wheelwright?
In a country town the master wheelwright ranked as a substantial craftsman, beside the blacksmith and above the labourer, and often employed a journeyman or two and an apprentice. The journeyman ranked by skill, paid the better part of a pound a week in a late-Victorian shop, without owning the customers. The factory hand and the garage fitter who replaced this rank were paid differently and knew different materials.
How were wheelwrights paid?
A master charged the customer by the wheel and by the ironwork, materials itemised. A journeyman was on a weekly wage, commonly the better part of a pound in the late nineteenth century. Repairs were the steady money. A new waggon was a larger bill and a rarer one. When factory wheels and rubber tyres took the new work, the weekly wage went with the orders. There was no national rate to fall back on.
Did wheelwrights have any interactions with the public?
The public knew the wheelwright, if at all, as the man whose yard shod a cart, and they knew the tyre fire if they lived near enough to see it. Sturt's book of 1923 gave a later, educated public a portrait of a shop already failing. Motorists did not think of him. Their vehicles came with wheels. The craft slipped out of public view with the horse waggon, more ignored than abolished.
What was the work schedule like for a Wheelwright?
Shop hours followed daylight and the season. A farmer's broken wheel in harvest was a long day. A new wheel was several days of bench work plus the tyre fire, not a single morning. Journeymen kept something like a six-day week in a busy late-Victorian shop. Nothing in the motor age required those hours of him, because the order was no longer placed. The craft's day was as long as the timber took, and then there was less timber.
What tools did wheelwrights use to do their job?
The spoke-shave and the drawknife shaped spokes and felloes. Augers and chisels cut mortises. An adze and a saw prepared stock. The tyre fire, tongs, and levers belonged to the ironing, often shared with a blacksmith if the wheelwright did not smith his own hoops. Factory presses and rubber-tyre plant were not a new spoke-shave. They made a wheel the bench was not asked to make.
Were there any dangers associated with being a Wheelwright?
The tyre fire was the hour the shop treated carefully: a hot hoop, a wooden wheel, and a quench that had to come at the right moment so the rim was compressed and not burnt through. Heavy stocks and driven spokes rewarded a missed blow with a spoiled joint more often than with a story. The craft's own talk, in Sturt and in shop memory, is about timber and fit. A failed wheel on the road was the disaster they worked to prevent.
Did wheelwrights work alone or in a team?
A country shop was a small team: master, one or two journeymen, an apprentice, and on tyre day anyone who could lift. The blacksmith was a partner when the hoop and the boxing were forged next door. The body-maker or the farmer was the customer. Factory wheel-making replaced that team with a plant. The garage replaced the repair side with fitters who did not know a felloe.
What were the typical duties of a Wheelwright?
He had to select timber, build a wheel true to its dish, shoe it with a tyre that would stay on, and repair the same kinds of wheel when farms broke them. He was answerable for a joint that opened or a tyre that ran loose. Keeping the shop's promises in harvest, when a cart could not stand idle, was part of the duty. A beautiful wheel delivered late had already failed the customer.
How did one become a Wheelwright?
A boy from a wheelwright's family, or a town boy put to a trade, started by indenture, traditionally seven years, on the rough work of the yard. He learned to grind tools and to sweep shavings before he learned to dish a wheel. The start that mattered in the end was whether any master after about 1910 was still willing to bind him. Many were not, because they could not see seven years of orders ahead.
Were wheelwrights considered skilled workers?
The skill was timber and geometry together: a stock that would not split, spokes that shared the load, felloes that met, a dish that ran, a tyre that tightened the whole. Any carpenter could cut a curve. Very few could make a wheel a farmer would trust at harvest. Factory wheels did not have to be more beautiful. They had to be cheap and uniform, and they were, which is what retired the judgement the skill consisted of.
What was the purpose of a Wheelwright?
The purpose was a wheel that would carry a load on a road or a field: cart, waggon, dung cart, or carriage, wood for the spring of it and iron for the wear. Everything else in the old road economy depended on that circle staying round. Rubber tyres and motor axles served the same purpose of bearing a load, by another construction. The purpose continued. The wheelwright's construction did not.