The Jobs Museum

Este contenido no se ha traducido.

Preguntas frecuentes

Complete list of questions and answers about the extinct profession: Recortador

From Revolución Industrial • 28 questions

Did croppers have any special uniforms or attire?

A cropper worked in a woollen waistcoat and shirt-sleeves, with a stout apron, because the shears were too heavy and too close to the cloth for a loose coat. He needed boots that would stand a damp shop floor, the cloth having been wetted for the raising. No livery belonged to the trade. In the West Riding he was known by the shears on his shoulder when he moved between shop and home, and by the quality of the face he left.

What ultimately led to the extinction of the Cropper profession?

Shearing frames and gig mills ended it. They finished cloth faster and at a lower piece cost than a bench of croppers, and Yorkshire clothiers adopted them around the start of the nineteenth century. The attacks of 1811 and 1812 did not turn the machines out for long. The Frame Breaking Act punished the attacks. The trade itself died because the frames kept the work, and a young cropper could no longer find pieces for the shears.

Were there any specific rituals or traditions associated with being a Cropper?

A piece was not cropped dry or in a hurry. It was damped, laid true on the board, raised, and then cropped in an order the shop did not vary, because a skipped pass showed later as a bar in the cloth. Shears were set and weighted before the first cut of the morning, not adjusted in the middle of a piece. Men who had served their time treated a new hand's impatience as the fault that put a hole in a clothier's goods.

What was the public perception of croppers?

Before the frames, clothiers and other woollen workers regarded the cropper as a proud, well-paid finisher. Mill owners who put in shearing frames regarded him as a cost, skilled and therefore expensive, standing between fulled cloth and a saleable piece. After 1812 the public print often remembered him only as a Luddite. The shop had known him first as the man who could finish a piece without spoiling it.

Were there any female croppers?

The heavy shears were men's work, and the croppers of the West Riding were men who had learned the board. Women in the same finishing trade burled knots from the cloth and mended small faults, at lower pay, before the piece ever reached the shears. A cropper's wage of a pound or more had kept a household. When the frames took it, the loss was the family's, even though wives had not stood the shearboard. Girls were not trained to those blades.

How did the job of a Cropper evolve over time?

Hand shearing with great blades is the old finish of broadcloth, medieval in origin and still the pride of an eighteenth-century woollen town. Teazle gigs began to take the raising, and shearing frames around 1800 took the cropping itself. By the 1830s a hand cropper in the West Riding was a remnant on ordinary cloth.

Were there any specific laws or regulations pertaining to the job of a Cropper?

The Frame Breaking Act of 1812 made destroying frames a capital offence, aimed at attacks in the hosiery districts and the West Riding. The York special commission of January 1813 tried the Yorkshire cases, Rawfolds among the events behind them. The Act installed no gig mill. Clothiers bought the machines because the piece cost fell, and the statute only punished men who smashed what was already in the shops.

Did croppers have any benefits or perks?

The perk was the rate itself: a pound a week or more in a good season, high for any woollen worker of the time, and a place in the croppers' own combinations. Some men owned their shears, which was a small independence inside a clothier's shop. There was no free cloth to take home worth counting, and no pension. When the pieces stopped coming to the board, the high rate was revealed as a perk that the frame could cancel.

Were there any differences in the job of a Cropper in different countries?

The crisis was Yorkshire's: Huddersfield, Leeds, and the Spen Valley cloth villages, Liversedge, Cleckheaton, and Heckmondwike among them. Rawfolds Mill, near Liversedge, became the best-known single site after the attack of April 1812. Earlier quarrels over gig mills had flared in Wiltshire and Somerset. The hand cropper's last stand, in public memory, is the West Riding.

Did croppers have any specific training or education?

A lad learned on the board beside a cropper, first brushing, damping, and handling teazles, and only later taking a share of the shears. The weight of the blades meant this was not a child's first job. Training belonged to youth and early manhood, often through a shop that expected a full term before a man was paid as a cropper. He was trained when he could finish a piece the clothier would accept without a second crop from the master.

Were there any notable challenges or obstacles faced by croppers?

The shears were simply heavy, and the day was a long repetition of the same controlled cut, with the cloth damped and the shop unheated for the sake of the nap. A false pass marked the piece, and a marked piece was not paid as a clean one. The strain the men themselves talked of was the weight and the concentration, sustained all the working day, on cloth that belonged to someone else.

How did the shearing frame affect the job of a Cropper?

The gig mill raised nap with teazles on a rotating cylinder, work a cropper had done by hand with a teazle handle. The shearing frame then cropped that nap with mechanical blades, faster than a bench of men and at a lower cost per piece. West Riding clothiers installed both across the years around 1800. Hand shearing survived only where a particular finish was still demanded, and then not as a trade that could employ the old numbers.

What role did croppers play in society?

The cropper stood at the end of the woollen line, after weaving and fulling, and made the cloth presentable for the market. A well-cropped piece sold as a better cloth. That is why the men who did it could hold a high piece rate for so long. He did not own the wool or the loom. He sold a finish, and the finish was exactly what the frames were built to copy.

Were there any famous croppers in history?

Public memory ties the cropper to the Luddite attacks of 1811 and 1812 in the West Riding, and above all to Rawfolds Mill in April 1812, which William Cartwright defended against a crowd of croppers. The York trials of 1813 fixed that episode in the newspapers. The trade's own fame, before the attacks, was quieter: the best-paid finishers in the Yorkshire cloth industry, known in the shops for the face they could put on a piece.

What time period did croppers exist in?

croppers worked mainly across c. 1760–1830. Hand cropping of woollens runs far back, but the cropper as a numerous, well-paid Yorkshire figure belongs to the later eighteenth century. The frames arrived in numbers around the turn of the nineteenth, and the open resistance was concentrated in 1811 and 1812. Through the 1820s the hand trade shrank. By about 1830 a young man in the Spen Valley no longer looked to the shears as a trade that would still be there when he was forty.

Were there any specific qualifications or skills required to be a Cropper?

A man was a cropper when a finishing shop would give him shears and a piece, and when clothiers would accept his face without sending it back. That meant a level nap, no holes, and no tracks from a heavy hand. There was no distant examination. Qualification was the local one: time on the board, and a master or a shop willing to call him a cropper rather than a helper.

What was the average age of a Cropper?

Helpers might start in the shop in their teens, brushing and raising, but the shears themselves wanted a grown man's strength and were a young man's trade in the years of full pay. The well-paid croppers of the 1800s were men in their twenties and thirties. This was not a children's industry. The parliamentary worry about the cropper was the loss of adult male wages, not the employment of small hands on the blades.

Was there a hierarchy within the profession of Cropper?

Inside the woollen trades the cropper ranked high: better paid than the weaver or the spinner of the same district, and organised enough to be feared by clothiers. He stood below the clothier who owned the pieces and above the burler and the ordinary mill hand. The shearing frame abolished that rank rather than relocating it. A minder of frames was not a cropper on a lower step. He was a different worker, paid as one.

How were croppers paid?

Payment was by the piece of cloth dressed, and in a busy season before the frames it commonly came to a pound a week or more, a high wage in the woollen north. The rate varied with the quality demanded and with whether the face was accepted. There was no salary from a mill. When the frames took the pieces, there was also no compensation fund. The pay simply ceased to be offered on the old scale.

Did croppers have any interactions with the public?

Before 1811 the cropper was little known outside the cloth districts, a finisher whose work the buyer never separated from the cloth. After the attacks of 1812 he was publicly a Luddite, a figure in trials and in argument about machinery. That fame hides the plainer fact. His trade ended because shearing frames cropped cloth more cheaply, and the public that wore the cloth did not ask whose shears, or whose frame, had finished it.

What was the work schedule like for a Cropper?

Shop hours ran with the daylight and the clothier's pressure, commonly from early morning into the evening when pieces were waiting. A single broadcloth was not a few minutes' work. Raising and several crops could fill the best part of a day for one man, or less when a shop divided the passes. The frames later finished the same pieces in a fraction of those hours, and that comparison destroyed the rate.

What tools did croppers use to do their job?

The defining tool was the cropper's shears, a great pair of flat blades several feet long, used with weights on a shearboard to level the nap. Teazle handles raised the fibre first. Brushes, a damping pot, and lead weights were the rest of the bench. The gig mill and the shearing frame were the tools that replaced this set, not improved versions of it that a cropper could carry home.

Were there any dangers associated with being a Cropper?

The weight of the shears and the repetition were the hazards the shop respected, along with a damp floor and blades that had to miss the cloth itself. A slip of the hand spoiled the piece, which was the loss the cropper was paid to avoid. Accounts of the trade from the time of the frames talk about wages and machines. They do not treat the shearboard as a spectacle of accidents, and they do not put children on those blades.

Did croppers work alone or in a team?

A finishing shop held several croppers, each with shears, plus helpers to brush, damp, and carry pieces. Burlers, often women, prepared the cloth before it reached the board. The clothier or his foreman judged the face and paid the piece. It was a small team with a sharp rank inside it. The man on the shears was the craftsman. The frame later replaced that team with minders.

What were the typical duties of a Cropper?

He had to raise an even nap, crop it level without cutting the ground of the cloth, and leave a face the clothier would pass. That meant damping, laying, cropping in passes, brushing the shearings clear, and folding the piece. He was answerable for holes and bars. A spoiled finish was not a small defect in a large mill. It was the piece he would not be paid for.

How did one become a Cropper?

A boy from a cropping family or a cloth village started as a helper, not on the full shears. He brushed, fetched teazles, and learned the look of a good face for years before a shop let him crop. The start that mattered was the first piece taken at a cropper's rate. Before the frames, that step opened a well-paid adult trade. After them, the same step led into a shop that was already buying machines.

Were croppers considered skilled workers?

The skill was a level face: nap raised evenly, nap cropped off evenly, and the cloth underneath never nicked. Any strong man could lift the shears. Very few could use them all day and still have the piece accepted. That narrow skill is why the wage stood high, and why a machine that merely approximated it was enough, in the clothier's ledger, to end the premium.

What was the purpose of a Cropper?

The purpose was to finish woollen cloth so that it would sell: a close, even face on broadcloth and the related Yorkshire goods. Buyers judged wool with their eyes and fingers. The cropper was the last hand to touch that judgement before the piece left the district. Once a frame could offer a regular enough face at a lower price, the purpose remained and the man did not.