The Jobs Museum

Este contenido no se ha traducido.

Preguntas frecuentes

Complete list of questions and answers about the extinct profession: Fabricante de cadenas

From Principios del siglo XX • 28 questions

Did chainmakers have any special uniforms or attire?

Women chainmakers wore heavy working skirts, aprons of leather or sacking, and often a cap or a kerchief against the hearth. Boots had to stand a backyard floor and hot scale. There was no factory uniform in a dolly shop. Photographs of the 1910 strike show the same plain clothes on the picket that had stood at the bick the week before. The trade dressed for heat and hammers, not for a show.

What ultimately led to the extinction of the Chainmaker profession?

The starvation price ended in the 1910 strike, when women at Cradley Heath forced payment of the Trade Board's twopence-halfpenny an hour. The backyard trade itself ended as machine-made and welded chain took the common orders in the early twentieth century. The law had made the old shop's only advantage, extreme cheapness, illegal. The factory then made the chain.

Were there any specific rituals or traditions associated with being a Chainmaker?

A shop started by making the hearth and checking the size-iron, because a chain that drifted fat or thin would be refused at the weigh-in. Links were welded in a rhythm the hands knew, scarf, bend, heat, blow, and a broken rhythm showed as a cold weld. On strike days in 1910 that order stopped. The ritual that replaced it, for those weeks, was the meeting and the refusal to take iron out at the old price.

What was the public perception of chainmakers?

Employers of small chain treated the backyard woman as the cheapest way to fill a hundredweight, until the law said otherwise. Newspaper readers in 1910 were invited to see her as the figure of a sweated trade, which was accurate as to the five or six shillings and incomplete as to the skill. Inside Cradley Heath she was an ordinary worker in a local staple. The strike made her briefly national. The hammering had been local for decades.

Were there any female chainmakers?

Women made the small chain. That division was the trade's own: lighter links in backyard shops, heavy cable chain by men in larger works. Girls learned the small sizes in those same shops, on the same long day, for a smaller share of the hundredweight money. The 1910 strike was a women's strike, led with Mary Macarthur, because the Trade Board rate that employers were avoiding was the women's rate.

How did the job of a Chainmaker evolve over time?

Hand-hammered chain in the Cradley district grew with the Black Country iron trades through the nineteenth century, and the domestic shop became the sweated end of it. By the 1890s and 1900s the women's hundredweight price was a public scandal in the making, which the 1909 Act and the 1910 strike then faced. After the minimum, common chain moved toward machinery and welded factory chain.

Were there any specific laws or regulations pertaining to the job of a Chainmaker?

The Trade Boards Act 1909 set up boards for a handful of sweated trades, chainmaking among the first, with power to fix a minimum rate. The Chain Trade Board's rate for the women was twopence-halfpenny an hour, due to operate in 1910. Many employers did not pay it. The strike of that year, and the attention it drew, enforced the rate the Act had already authorised. The Act did not itself invent a chain machine. It made the old price illegal.

Did chainmakers have any benefits or perks?

Before 1910 there was no perk worth the name. Outwork meant a woman could hammer in a shop by her house, which tied the day's length to the hundredweight rather than freeing her. The strike's gain, twopence-halfpenny an hour instead of five or six shillings a week, was a legal floor, not a gift from the employer. The only improvement the trade ever won by combination was that minimum rate.

Were there any differences in the job of a Chainmaker in different countries?

Cradley Heath was the centre, in the Black Country, with Old Hill, Quarry Bank, Lye, and the small-chain streets around them full of backyard shops. Heavy chain was made nearby in larger works, a different shop and usually a man's. The 1910 dispute put this small district into the national papers. The chain itself had been leaving it for years, sold by factors to buyers who never saw the bick.

Did chainmakers have any specific training or education?

Girls learned in the shop from mothers and neighbours, starting on the lightest links and the simplest part of the weld. There was no formal apprenticeship for the women's small chain, and no premium. Usefulness came early, and so did the long day, paid inside a low hundredweight rate. A worker was trained when her links passed the size and the weld. That was a craft standard. The pay, until 1910, was not a craft pay.

Were there any notable challenges or obstacles faced by chainmakers?

The hardness was the rate and the day together. Women hammered from morning into the evening, often ten or twelve hours, for five or six shillings a week before the strike. Girls on the small sizes shared those hours for less. The weld had to be sound or the bundle was rejected, so the work could not be careless even when it was miserably paid. The 1910 evidence is about those hours and that money.

How did machine-made chain affect the job of a Chainmaker?

Once the legal minimum made starvation prices impossible, the backyard shop could no longer undercut a factory. Machine-made chain, and then electrically welded chain, produced ordinary links at a cost the dolly shop could not touch even with skilled hands. Heavy hand chain in larger works lasted longer for special jobs. The women's small-chain shops, which had existed by being cheap, lost the orders.

What role did chainmakers play in society?

The woman chainmaker supplied the common small chain that farms, households, and general ironmongers bought by weight. She stood at the cheap end of a district that also made heavy chain. Factors collected her bundles and sold them on. Her role depended on a price below any factory's. When the law forbade that price and machines filled the orders, the role disappeared even though chain was still being sold.

Were there any famous chainmakers in history?

Mary Macarthur is the name the trade gave to the country. She organised the women chainmakers of Cradley Heath in the strike of 1910 through the National Federation of Women Workers. The strike made the twopence-halfpenny rate real rather than a notice on a wall. No earlier chainmaker had been a public figure. The fame belongs to that year, to those women, and to a minimum wage they had to strike to receive.

What time period did chainmakers exist in?

chainmakers worked mainly across c. 1870–1914. Small-chain outwork at Cradley Heath was a nineteenth-century growth and a late-Victorian scandal in its pay. The decisive public moment is 1910, after the 1909 Act had fixed a rate employers were slow to pay. The backyard trade then declined through the early twentieth century as factory chain took the common sizes. By the Great War the old sweated shop was no longer the main way small chain was got.

Were there any specific qualifications or skills required to be a Chainmaker?

A woman was fit for the shop when she could scarf, link, and weld to a true size fast enough to make weight, and sound enough that the bundle was not thrown back. Nobody issued a certificate. Girls were at the light work before that standard, paid less. The Trade Board rate did not ask for a new qualification. It said the existing work could not legally be bought at the old price.

What was the average age of a Chainmaker?

Girls came into the small-chain shops in their teens, and sometimes younger, learning the light sizes on a full working day for a small share of the hundredweight pay. The strikers of 1910 were grown women, many of them with years at the bick, plus younger hands from the same shops. The hearth took hands as soon as they could hold a light link, and paid them poorly for it.

Was there a hierarchy within the profession of Chainmaker?

Within chainmaking, the women's small chain ranked below the men's heavy chain, in pay, in shop size, and in public respect, until 1910 forced a comparison. A backyard worker ranked below the factor who bought her hundredweight. The strike did not make her a master. It established that her hour had a legal price. After that, the factory hand on a chain machine was a different rank again, and the one that lasted.

How were chainmakers paid?

Before 1910 pay was by the hundredweight of finished chain, and a long week often yielded five or six shillings once the work was weighed. The Chain Trade Board rate was twopence-halfpenny an hour. On a full week that came to something over ten shillings, which is what the strike insisted on receiving. Employers who kept paying the old weight-price after the rate was due were the reason there was a strike at all.

Did chainmakers have any interactions with the public?

Until 1910 the public used small chain and did not know Cradley Heath. The strike, reported nationally and backed by Macarthur's federation, made the five-and-six-shilling week a known fact. Readers were asked to support a legal minimum, not to admire a picturesque forge. When the backyard shops later faded, the public went on buying chain and did not notice that a factory had welded it.

What was the work schedule like for a Chainmaker?

Before the minimum, a woman often worked from morning into the evening, ten or twelve hours and sometimes more, because only weight was paid and the weight came slowly. Girls in the shop kept those hours for a smaller share. Twopence-halfpenny an hour did not shorten the day by itself. It meant the day had to be paid, which is why employers who wanted the old long week at the old price resisted.

What tools did chainmakers use to do their job?

The backyard kit was a small hearth, a bick iron, a hammer, tongs, and a dolly to hold the link, plus a measure for the size in hand. Rod came in from the employer or the factor. The shop often stood in a yard behind the house. A chain machine or a welding plant was not a larger dolly. It was a factory method that made links without this hand weld, and it took the orders once the hand rate was a legal wage.

Were there any dangers associated with being a Chainmaker?

The hearth was hot and the hammering was repetitive, and the 1910 accounts talk about the length of the day and the five or six shillings, not about a display of accidents. Girls shared the shops and the hours at a lower share of the pay. The harm the strike put in front of the country was the rate. A rejected bundle, a cold weld, a short weight: those were the losses the shop itself counted, in money.

Did chainmakers work alone or in a team?

A dolly shop might be one woman, or a few women and girls, sharing a hearth and dividing sizes. The employer or factor who issued rod and bought chain stood outside. Heavy-chain shops, with men, were a separate team in the same district. The 1910 strike joined the backyard workers into a larger combination than the shop had ever been. That combination was temporary. The everyday team remained the small hearth.

What were the typical duties of a Chainmaker?

She had to cut, scarf, link, and weld small chain to the size ordered, and to make weight that would pass when it was bundled. Cold welds and mixed sizes came back on her money. After 1910 her duty to the employer was the same work. His duty, which the strike enforced, was to pay at least twopence-halfpenny an hour for the time it took.

How did one become a Chainmaker?

A girl started in a relative's or a neighbour's backyard shop, on the smallest chain, as soon as she could handle a light rod. No indenture and no premium stood in the way, which is why the trade could be so poorly paid and so full. The start in 1910 looked the same at the hearth and different in law: a beginner was now supposed to be inside a minimum rate, not outside all protection because she was only learning.

Were chainmakers considered skilled workers?

A sound weld on a small link, repeated fast enough to make a hundredweight, was a skill, however badly it was paid. A cold shut link failed in use and was rejected at the scale, so the hammering was not unskilled pounding. Machines did not prove the hands had been unskilled. They produced a cheaper link once the law stopped the hands being bought at five or six shillings a week.

What was the purpose of a Chainmaker?

The purpose was ordinary small chain, sold by weight for farms, kennels, carts, and general use, made where Black Country iron was close at hand. The district's heavy chain served ships and industry. The women's shops served the cheap common sizes. That purpose survived. The backyard way of meeting it did not, once a factory could weld the same chain under a wage the dolly shop could no longer undercut.