The Jobs Museum

Este contenido no se ha traducido.

Preguntas frecuentes

Complete list of questions and answers about the extinct profession: Encargado de banco

From Era Victoriana • 28 questions

Did banksmen have any special uniforms or attire?

He wore the ordinary clothes of a surface colliery man: a jacket or waistcoat, stout trousers, boots, and a cap, with an oilskin when the bank was open to the weather. A lamp or a token pouch might hang at his belt during riding hours. There was no heraldic uniform. Later pits sometimes issued a helmet and a badge. The steam-era bank was identified by where he stood, not by a costume.

What ultimately led to the extinction of the Banksman profession?

What ended this form of the work was pit closure combined with the enclosing and automation of winding. Interlocks, electric winders, and control rooms took the open-bank bell job where shafts remained. The word banksman did not end. It is still the ordinary name for a person directing a crane or hoist, and mining rules still speak of shaft duties. The exhibit records the steam cage-and-bell post as the thing that thinned.

Were there any specific rituals or traditions associated with being a Banksman?

Each wind followed the same order. The cage arrived, keps took its weight if they were in use, gates opened, tubs or men came off and on, gates closed, keps cleared, and the bell told the engineman the shaft was his. Riding hours had a stricter version of the same order, with a count of men. The ritual was a safety sequence, repeated every wind, not a ceremony for visitors.

What was the public perception of banksmen?

Miners treated the banksman as a responsible surface man, the person who could refuse a crowded cage or hold a wind. He was not romanticized as a faceworker, and he was not dismissed as unskilled labor. Managers saw him as an official they had to appoint. The public outside coal districts rarely knew the title until a disaster inquiry or a museum explained why a bell at a shaft mattered.

Were there any female banksmen?

The steam-era banksman was a man. Women worked at the surface in some coalfields, notably the pit-brow lasses of Lancashire who sorted coal at the screens, and that work was not charge of the shaft. The mines acts put a competent appointed person on the bank and in practice that person was an adult man. Confusing the brow woman with the banksman mixes two surface jobs that colliery rule books kept apart.

How did the job of a Banksman evolve over time?

Early winding brought coal up in a corf on a hemp rope, with a banksman already at the mouth. The steam cage, guide rails, and a bell to a distant engine made the Victorian post this exhibit means. Through the twentieth century, electric winders, interlocks, and enclosed heapsteads folded the signals into machinery. The man with the rapper became rarer as each pit rebuilt its shaft top or shut. The title outlived the steam bank.

Were there any specific laws or regulations pertaining to the job of a Banksman?

Coal mines regulation from the later nineteenth century, and the Coal Mines Act 1911 in particular, required competent banksmen and onsetters, appointed by the manager, and a code of signals the engineman could rely on. Special rules at each colliery spelled the local raps. Winding men with coal, leaving the bank, and allowing an unappointed person to give signals were all matters those rules policed.

Did banksmen have any benefits or perks?

The banksman shared the ordinary perquisites of a colliery servant on the books: a regular wage, often house coal, and sometimes a cottage in the rows the company owned. The post itself was a perk in the sense that it was steadier and better paid than casual surface labor. He did not share the hewer's output bonus in the old way. A responsible appointment and a dry wage packet were the real extras.

Were there any differences in the job of a Banksman in different countries?

Every steam-wound British colliery had a bank and therefore a banksman: the Durham and Northumberland coast pits, the West Riding, Lancashire, Staffordshire, South Wales, and the Scottish coalfields. The place was the heapstead at the shaft mouth, with the engine house in sight or within bell-wire reach. A drift mine without a winding shaft did not use him in this form. The exhibit is the shaft pit, not the later opencast.

Did banksmen have any specific training or education?

He learned the bank by years at the pit, often as a surface hand or as an onsetter's assistant, before the manager would appoint him. The essential training was the signal code, the behavior of keps and gates, and the rule about when men could ride. There was no university course. Twentieth-century regulation added a formal expectation of competence and, later, certificates for winding staff.

Were there any notable challenges or obstacles faced by banksmen?

The work was watchfulness more than weight. He stood a full winding day in weather, counted men, kept unauthorized boys off the cage, and carried the knowledge that a wrong rap moved a rope he could not stop with his hands. Busy drawing hours left little pause. The hardness was sustained attention at an open shaft, which the rule book treated as the reason the post had to be filled by a competent adult and not left for whoever was nearest.

How did enclosed automatic winding affect the job of a Banksman?

Two different things replaced the man in this exhibit. Pit closure removed the shaft entirely, which removed the post. On shafts that kept winding, enclosed heapsteads, electrical signaling, interlocks that would not let a gate open on a moving cage, and fewer operators in a cabin took the judgment he had exercised with a bell and a view of the landing. The crane banksman of a building site is a namesake, not the colliery successor.

What role did banksmen play in society?

His role was to be the surface controller of the shaft. The engineman supplied power, the onsetter loaded the bottom, and the banksman decided the top: who entered, whether the cage was clear, and which signal was lawful. Coal could not be drawn and men could not ride if that role was empty. He was not a manager and not a deputy on the face. He was the appointed official of the bank.

Were there any famous banksmen in history?

Banksmen are not household names. The post is famous through colliery rule books, the signal plates fixed beside shafts, and the mines acts that made appointment compulsory. Inquiries after winding accidents examined whether the raps were given and obeyed, which is how the job entered official paper. No single banksman stands for the trade the way a named author stands for a book.

What time period did banksmen exist in?

banksmen worked mainly across c. 1840–1960. The years on this label, about 1840 to 1960, cover the steam-winding cage and the long survival of bell signals beside it. Cages and steam winders were spreading by the early Victorian decades. Many pits still worked that way into the mid-twentieth century, even as electric winders arrived. After large-scale closure and automation the open-bank bell job became uncommon. The dates bracket the form, not the lifespan of the English word.

Were there any specific qualifications or skills required to be a Banksman?

He qualified by competence and by appointment. The manager had to be satisfied that he knew the signals, the cage, and the rules for riding, and the appointment was a deliberate act, later a written one. An unappointed man giving signals was not a banksman. Age in the mature regulations was adult, with enough pit service to be trusted at the shaft. The qualification was the manager's appointment plus the code.

What was the average age of a Banksman?

The banksman was a grown man, typically with years of pit service, not a youth and not a child. Later statutes and regulations set minimum ages for persons in charge of winding operations and expected an adult of settled experience. A boy might carry messages on the bank. He did not hold the bell. The exhibit is that adult appointment, which is one reason this label never treats the banksman as a junior variant of the hurrier.

Was there a hierarchy within the profession of Banksman?

He ranked as a responsible surface official, above day laborers and screen hands, below the manager and the under-manager, and apart from the deputies who supervised underground districts. The engineman was a parallel skilled post at the engine, not his subordinate and not his master. In the social order of a pit village the banksman was a steady company man with a named post. Rank came from the appointment, not from a union lodge title alone.

How were banksmen paid?

Wages were a time rate, a shift or a week, paid by the colliery with the other surface grades. Late Victorian shifts commonly earned several shillings, the exact scale varying by coalfield and by whether the pit was winding men, coal, or both. Piece rates on tubs were not his bargain. Twentieth-century national and county agreements folded the grade into a weekly scale. The pay packet was regular, which was the point of being on the books.

Did banksmen have any interactions with the public?

The public met him, if at all, as the man who stood by the cage when visitors or a new boy were shown the shaft, or as a title in a newspaper account of a winding incident. Inside the coalfield his post was well known because everyone who went down had to pass his gates. Museum visitors should leave knowing he rang the engine, and that a modern banksman directing a crane is not this colliery job and is not extinct as a word.

What was the work schedule like for a Banksman?

Hours matched the winding time of the pit. When coal was being drawn he was at the bank, which could be a long day in Victorian practice or a defined shift once pits ran round the clock with relays of banksmen. Riding at the start and end of an underground shift was the busiest legal moment. He was not free to leave for a meal if the cage was in use, unless another appointed man took the bell. The shaft's hours were his hours.

What tools did banksmen use to do their job?

His instruments were the signal bell or rapper and its wire to the engine house, the cage gates, the keps or chairs that held the cage at the landing, and the board or plate that displayed the code. A token or tally system for men riding was often in his charge as well. He did not hold the winding lever. That was the engineman's. The banksman's tools were the signals and the furniture of the shaft mouth.

Were there any dangers associated with being a Banksman?

An open shaft and a moving cage were the hazard. A wrong signal, a gate left open, or a man stepping in as the rope took the load could kill, which is why the rules made one competent adult responsible and forbade casual signaling. This label states that fact without a catalogue of accidents. The danger is the reason the post was statutory. It is also why automation later interlocked the gates with the winder.

Did banksmen work alone or in a team?

He worked as a trio with the winding engineman and the onsetter at the pit bottom, plus the banksmen on other shifts and the surface hands who took tubs away to the screens. The manager appointed all three shaft men. They rarely stood in one place. The bell line was the team. Face deputies, hewers, and screen women were nearby in the life of the pit and were not part of the winding conversation.

What were the typical duties of a Banksman?

Duties were to attend the bank while winding was in progress, give the lawful signals, control gates and keps, regulate who entered the cage, and refuse a wind that the rules did not allow. He had to keep the landing clear of people who were not riding or working the tubs. He did not repair the engine, did not cut coal, and did not set underground sprags. His duty was the surface end of the shaft and nothing else.

How did one become a Banksman?

A man started toward the post by working on the bank or at the pit bottom until he knew the code and a manager would appoint him. There was no separate guild to join. In the steam era a reliable surface man in his prime was the usual recruit. Formal certificates came later as winding regulations tightened. The start was always an appointment to a living shaft, not a freelance decision to stand there.

Were banksmen considered skilled workers?

The skill was the code, the cage, and the judgment of a busy landing: when a wind was legal, when a tub was fouling a gate, when a rider was not clear. It was not the craftsman's skill of the fitter in the engine house, and the pits did not pretend it was. They did treat a good banksman as a skilled responsible man, because a hesitant or inventive signal was worse than a slow one. The skill was procedure carried out without drift.

What was the purpose of a Banksman?

The purpose was safe, orderly winding. Coal and men had to pass a vertical shaft under the control of an engine the landing could not see into. Someone at the top had to be the eyes and the authority. That was the banksman. Without him the engineman had no lawful signal and the cage had no master at the mouth. The purpose lasted as long as shafts were wound by a person reading bells on an open bank.