The Jobs Museum

Dieser Inhalt wurde nicht übersetzt.

Häufige Fragen

Complete list of questions and answers about the extinct profession: Bremsmann

From Mitte des zwanzigsten Jahrhunderts • 28 questions

Did Brakemen have any special uniforms or attire?

A brakeman wore durable work clothes, a cap, and boots that could hold a wet running board, with a lantern in one hand and often a brake club in the other. No passenger uniform belonged to the freight craft. In winter the layers were whatever kept him on the car; in the yard the same clothes took grease and cinders. The kit was practical and unmistakable on a crew.

What ultimately led to the extinction of the Brakeman profession?

What ended the classic profession was radio and diesel road practice, after the air brake had already reduced the roof walk. Automatic couplers and Westinghouse brakes made the older method less necessary; they did not by themselves abolish the brakeman. A crew that took orders by radio and no longer sent a man over the cars is the ending. The roof-and-pin craft does not continue under another name.

Were there any specific rituals or traditions associated with being a Brakeman?

Before departure he walked the train he was responsible for, looking at couplings and brakes and agreeing signals with the conductor and the engineer. On the road the repeated act was the lantern and the brake, not a ceremony. At the end of the run the ritual was the yard again: cut off, tie down, and sign the day the agreement required.

What was the public perception of Brakemen?

Railroad towns knew the brakeman as a young operating man in a dangerous craft, admired and also treated as the junior who might become a conductor if he lived and lasted. Passengers on a freight rarely existed; the public met him at a crossing or a small depot. Popular songs made him a wanderer. The men on the crew knew the work was mostly signals, switches, and brakes.

Were there any female Brakemen?

American roads hired brakemen as men throughout the classic decades of this exhibit. Women worked stations, offices, and some shops without being assigned to couple cars or ride freight roofs. The craft's danger and its hiring rules reinforced each other. This label does not borrow a later, different crew job in order to pretend the old running board was mixed.

How did the job of a Brakeman evolve over time?

The early craft was link, pin, and hand brake, with the roof as a workplace. Air brakes and automatic couplers, spreading after the 1890s safety law, moved more of the work to the ground and the caboose. He still switched, still rode freights, and still passed signals. Radio and diesel road service were the later change that ended the classic assignment rather than merely shortening the roof walk.

Were there any specific laws or regulations pertaining to the job of a Brakeman?

The federal safety-appliance law of 1893 required power brakes and automatic couplers on interstate railroads, with years of compliance after the statute. Hours-of-service rules later limited how long a train crew could work. Those laws answered a casualty record; they did not create the brakeman. Contract rules then governed seniority, crew size, and the rate for a trip.

Did Brakemen have any benefits or perks?

The advantage that mattered was a place on the operating roster and a path, by seniority, to conductor. Railroad employment could bring pass privileges and, once organized, lodge benefits. There was no tip and little public glory on a freight. A regular run in decent weather was spoken of as the perk, against extra-board nights and hills in the rain.

Were there any differences in the job of a Brakeman in different countries?

He worked American yards, main lines, and branch freights, from the roofs and running boards of cars to the ground beside the train and the caboose that was his rolling base. The geography is the United States because this label follows American couplers, air-brake law, and crew practice. A classification yard at dusk and a mountain grade were the two places the craft was judged.

Did Brakemen have any specific training or education?

Training was the extra board and the older brakeman or conductor who showed him how to couple, how to get on and off moving equipment, and how to read a lantern. Rules examinations came with the railroad, not with a public school. No one pretended the first weeks were safe. Seniority, not a certificate on the wall, recorded that he had become a brakeman.

Were there any notable challenges or obstacles faced by Brakemen?

The hard parts were the roof in bad weather, the space between cars, and the need to be exact when tired. A heavy train on a grade meant brakes at the right moment, not heroics. Nights on the extra board broke sleep. The craft's difficulty was not subtlety of paperwork. It was doing a simple thing in a place where a mistake had no room.

How did radio and diesel road practice affect the job of a Brakeman?

Air brakes first reduced the roof walk, and automatic couplers reduced the worst of link-and-pin coupling, yet a brakeman remained on freights for decades. The end of the classic job came when radio and diesel road practice changed the crew itself. Signals no longer had to be walked along the tops, and the ground work of an older freight was reassigned or abolished. A radio in the cab is the replacement, not a new kind of pin.

What role did Brakemen play in society?

His role was to make and control the train from outside the cab: couple, brake, switch, and carry signals between engineer and conductor. He was not the person who ran the locomotive and not the clerk who billed the shipment. On a freight he was the reason a long string of cars could be handled before radio and automatic brakes did that work another way.

Were there any famous Brakemen in history?

Jimmie Rodgers worked as a railroad brakeman and later billed himself as the Singing Brakeman, carrying the craft's name into the recording studio. The Brotherhood of Railroad Trainmen grew from a brakemen's brotherhood founded in 1883. Most men who held the job never became singers or lodge presidents. They made up trains until seniority or injury or a newer crew plan moved them.

What time period did Brakemen exist in?

Brakemen worked mainly across c. 1870–1960. The exhibit runs from the late nineteenth-century roof-and-pin era through the air-brake decades and into the mid-twentieth century, when radio and diesel practice closed the classic job. The 1890s safety law is the hinge, not the ending. A brakeman of 1910 and a brakeman of 1940 did not do identical work, and both belong here until the older form actually disappeared.

Were there any specific qualifications or skills required to be a Brakeman?

The railroad qualified him by hiring him onto a crew and satisfying itself that he could couple, brake, and work under the rules. Literacy enough for the rule book mattered. No outside guild sold a license at the start. Survival and seniority then qualified him for better runs. A conductor's exam, if he sought it, was a later door, not the entrance.

What was the average age of a Brakeman?

He was typically a young man at the start, often in his late teens or twenties, because the roofs and the extra board consumed stamina. Older brakemen were those the seniority list had not yet made conductors, or men who stayed with the craft. The job's public image was youthful even when a particular crew was not. Boys were not the legal crew on main-line freights.

Was there a hierarchy within the profession of Brakeman?

He ranked below the conductor and apart from the engine crew, junior among operating employees and senior to a pure casual hire. Two brakemen on a crew still had a head-end and a rear-end assignment rather than equal fame. Lodge office or a step up to conductor changed rank. To the town he was simply one of the trainmen.

How were Brakemen paid?

Pay was by the trip or the day under company rules and later under a union agreement, not by the car coupled and not by tips. The conductor's rate was the comparison everyone made. Extra-board men felt the wage as irregular even when the scale looked fair on paper. Danger was not a separate bonus. It was the condition of the rate the craft had to bargain.

Did Brakemen have any interactions with the public?

The public saw him at depots, crossings, and in the occasional ballad, and otherwise did not meet a freight brakeman at all. He was not a salesman and had no counter. When newspapers mentioned the craft it was usually because someone had been killed or injured, which shaped a grim popular picture. On an ordinary day he was invisible and necessary.

What was the work schedule like for a Brakeman?

Hours were train hours, irregular by nature, later bounded by hours-of-service law and by the crew agreement. A run might be a daylight local or an all-night freight. The extra board meant waiting for a call rather than a set office week. Time away from home was part of the job. The yard did not close because a man was tired.

What tools did Brakemen use to do their job?

His tools were a lantern for signals, a brake club for the hand wheels, pins and links in the older coupling years, and a switch key when the crew had to line a route. The hand brake and the coupler were the railroad's, not his property. Air hoses, once they spread, became another thing he had to connect correctly. The caboose carried him; it was not a tool he owned.

Were there any dangers associated with being a Brakeman?

The danger was the space between cars, the roof in rain and ice, and the chance of a fall or a crush during coupling or while setting brakes. That toll was severe enough that federal law forced automatic couplers and power brakes onto interstate trains. This exhibit states the hazard plainly and does not describe wounds. Later radio practice was, in part, a way of keeping men off those roofs.

Did Brakemen work alone or in a team?

He worked for the conductor and with the engineer by signal, often beside a second brakeman assigned to the other end of the train. Yard crews were a related team with a different rhythm. The fireman and the engineer shared the run and not his footing. A freight crew was small, and each man's mistake showed up in the others' work immediately.

What were the typical duties of a Brakeman?

Duties were to couple and uncouple, set and release brakes, line switches, pass signals, and ride the train the conductor assigned. He protected the rear or the head as ordered and helped make up and break up the cars. He did not fire the engine or sell the freight. The duty that defined the classic years was braking and coupling from roof and ground.

How did one become a Brakeman?

He started by being taken onto a railroad crew, often as a young man on the extra board, learning from the men already on the cars. There was no long formal apprenticeship of the shop kind. The first couplings and the first roofs were the start, supervised only as far as a busy crew could supervise. Seniority from that hiring date governed the rest.

Were Brakemen considered skilled workers?

The motions look crude and were skilled: judging a coupling, boarding equipment that was moving, setting enough brake without sliding the train, and reading signals in the dark. Companies paid it as operating craft, below the conductor. A new man was a danger to himself until those judgments settled. The skill was bodily and exact, and it did not transfer to a radio desk.

What was the purpose of a Brakeman?

His purpose was to control loose cars and moving trains in the decades when brakes and couplers still needed a man on the equipment. The engineer could not reach every brake. The conductor could not be at both ends. The brakeman existed so a freight could be made, held, and stopped. When the hardware and the radio could do that without him, the purpose closed.